submit urlsubmit rss feedadd directoryOptimum Power

article

Compost is the decomposed remnants of organic materials (those with plant and animal origins). Compost is used in gardening and agriculture as a soil amendment, and commercially by the landscaping and container nursery industries. It is also used for erosion control, land/stream reclamation, wetland construction, and as landfill cover. (See Compost uses.)

Composting


Compost is the means by which organic matter is recycled in its environment. Compost is also used as a seed starting medium generally mixed with a small portion of sand for improved drainage.

Composting is the common name for the decomposition of organic matter under aerobic conditions. The decomposition is performed primarily by microbes, although larger creatures such as ants, nematodes, and oligochaete worms also contribute. This decomposition occurs naturally in all but the most hostile environments, such as within landfills or in extremely arid deserts, which prevent the microbes and other decomposers from thriving.

More on [ Compost ]


directory of related categories

 
Composting RSS feed
Waste Management & Research current issue

Moving toward COP 15
Savino, A., Hansen, J. A. Mon, 04 Aug 2008 00:00:00 -0000

Modelling waste generation by the telecom sector in Nigeria: the grey side of the impressive outing
Osibanjo, O., Nnorom, I.C., Ogbonna, K.C. Mon, 04 Aug 2008 00:00:00 -0000
Since the introduction of digital mobile technology into Nigeria in 2001, there has been a phenomenal improvement in mobile subscription, service delivery and in the overall penetration of mobile telecommunication into rural areas in the country. For instance, the country's teledensity increased from less than 1% in 2001 to about 25% in 2006 — an increase of more than 3000%. The aim of this paper is to predict improvements in telephone penetration and waste generation by the Nigerian telecommunications sector. This was achieved by regression analysis of available data on telephone subscription in the country. Our estimations indicate that an average of 3 million phones will be retired annually in the country. Considering an economic phone life of 4 years, the over 32 million phones, (weight estimated at about 3200 tons) in use in 2006 would be at their end-of-life (EoL) by 2010. This volume of waste may contain up to 1800 tons of waste plastics, 15 tons of lead and 124 tons of copper. Our derived regression equation also indicates that mobile phone penetration in the country would be about 40% by 2010. This implies that over 55 million mobile phones would be in use by 2010. The grey side of this impressive statistics is that waste generation by the telecommunications sector will also follow this trend. This paper also highlights the need to introduce a framework for the effective management of waste from this sector considering the toxicity of some of the components of mobile phones and accessories and the prevailing inappropriate disposal practices for such potentially `toxic' materials.
The performance of Spanish solid waste collection
Garcia-Sanchez, I.M. Mon, 04 Aug 2008 00:00:00 -0000
In this paper we examine street cleaning and waste collection services in Spanish municipalities with a population exceeding 50 000. The purpose is to identify factors that influence the efficiency of these services. Three input variables (staff, vehicles and containers) and four outputs variables (tonnage, collection points, collection point density and kilometres of surface area washing) are analyzed using an analytical model based on Data Envelopment Analysis (DEA) methodology. These variables, along with non-controllable input variable (Tourist Index), were chosen because they were shown, based on a Tobit regression analysis, to have a statistically significant impact on municipality behaviour. The results obtained show that scale inefficiency was lower than pure technical efficiency, the latter is linked to service management. It was observed that the street-cleaning activity was performed more inefficiently than that of waste collection. Furthermore, it was detected that municipalities can reduce the resources used in rendering this service by 8%. Finally, an estimation using the Mann—Whitney test allows us to conclude that there is no difference between the inefficiencies observed in municipalities managed directly by town councils and those which have been transferred to private companies.
GIS-based modelling for the estimation of municipal solid waste generation and collection
Karadimas, N. V., Loumos, V. G. Mon, 04 Aug 2008 00:00:00 -0000
In the present paper, an innovative model for the estimation of municipal solid waste generation and collection is proposed. This model is part of an extended solid waste management system and uses a spatial Geodatabase, integrated in a GIS environment. It takes into consideration several parameters of waste generation, such as population density, commercial activities, road characteristics and their influence on the location and allocation of waste bins. Ground-based analysis was applied for the estimation of the inter-relations between the aforementioned factors and the variations in waste generation between residential and commercial areas. Therefore, the proposed model follows a unified categorization approach for residential and commercial activities and focuses on the dominant factors that determine waste generation in the area under study. The most important result of the research work presented in the current paper is an accurate estimation of the optimal number of waste bins and their allocation. A new methodology and an appropriate algorithm have been developed for this purpose in order to facilitate routing and waste collection. By using these results, municipalities aware of social, economical and environmental factors, related to waste management, can achieve optimal usage of their resources and offer the best possible services to their citizens.
Nutrients and heavy metals distribution in thermally treated pig manure
Kuligowski, K., Poulsen, T. G., Stoholm, P., Pind, N., Laursen, J. Mon, 04 Aug 2008 00:00:00 -0000
Ash from pig manure treated by combustion and thermal gasification was characterized and compared in terms of nutrient, i.e., potassium (K), phosphorus (P) and heavy metal, i.e., cadmium (Cd), chromium (Cr), copper (Cu), nickel (Ni) and zinc (Zn) contents. Total nutrient and metal concentrations were measured using energy dispersive X-ray fluorescence analysis. Acid (HNO3, H2SO4) and water-extractable concentrations were also measured both in non-classified ash and in selected ash particle size fractions using flame atomic absorption spectrometry and colorimetric spectrometry. Results indicate that ash from gasified manure contained more water-extractable K in comparison with combusted manure whereas the opposite was the case with respect to P. Heavy metals Ni, Cr and Cd were present in higher concentrations in the fine particle size fractions (< 30 µm of particle diameter), whereas K, P, Zn and Cu exhibited higher concentrations in the coarser particle size fractions (> 30 µm).
Describing variability of MSW composition data with the log-logistic distribution
Milke, M. W., Wong, V., McBean, E. A. Mon, 04 Aug 2008 00:00:00 -0000
Variations in solid waste composition data are necessary as inputs to solid waste planning, yet uncertainty exists regarding which probability distributions might be generally valuable to describe the variability. Twenty-two detailed analyses of solid waste from British Columbia, Canada, were fitted to distributions using the BestFit software. Alternative distributions were ranked based on three goodness-of-fit parameters and twelve waste fractions. The log-logistic distribution was found to be the most able to fit over the wide range of composition types considered. The results were demonstrated to be insensitive to the number of waste components or to the choice of a two- or three-parameter distribution. Although other distributions were able to better match the waste composition for individual waste types, the log-logistic distribution was demonstrated to fit, overall, a wide variety of waste composition types.

 
Subscribe to Waste_Management RSS feed

directory of related sites

Agresource - Company engaged in beneficial utilization of organic waste materials, operating composting facilities in New England. Information on compost products, articles, and information on uses.
Meta Description: [ Agresource provides organic waste management services and beneficial utilization of municipal, commercial, and industrial residues as productive agricultural resources in New England. ]

BAV Umwelttechnik - Offers a range of recycling and composting services for waste management.
Meta Description: [ biological, ecological and economic waste management ]

BioMagic Odorstop - A non-enzyme and non-hazardous bio-stimulator to remove odors from waste, including composting, commercial waste haulers, bioremediation, and wastewater.
Meta Description: [ BioMagic's BioOdorStop and BioMagic 500 are new, patented, proprietary, non-enzyme, non-bacterial, instant natural odor eliminator, Bio-Stimulants that are Non-hazardous, environment friendly and supplies the nutrients for aerobic digestion. ]

CH2M Hill - Offers pre-engineered composting system modules.
Meta Description: [ CH2MĀ HILL is a global leader in full-service engineering, construction, and operations. ]

Earthcare - Manufactures compost maturity test kits, soil life test kits, and biodegradable compostable food scrap bags.
Meta Description: [ Earthcare products for the improvement and management of soil and compost include compost maturity test kits, soil life test kits and biodegradable compostable food scrap bags. ]

Green Mountain Technologies - Manufactures composting and sludge dewatering equipment for the municipal and industrial markets.

HotRot Composting Systems - Manufactures an organic waste treatment in vessel composter.
Meta Description: [ Hot Rot industrial composting units are large scale composting systems which offer cost-effective and sustainable alternatives to landfill. ]

ICS International Composting Services - Multi-disciplined consulting engineering company providing engineering project and construction management expertise for all kinds of waste treatment plants.
Meta Description: [ ICS International Composting Services is a small multi-disciplined consulting and engineering company for all kinds of waste treatment plants. ]

New Earth Services - Operates a compost facility near Hurlock, MD, recycling the by-products of food processors and farms.
Meta Description: [ New Earth Services operates a compost facility located near Hurlock, MD. We specialize in serving as a recycling center for the by-products generated at food processors and farms on the Eastern Shore. ]

Orca Environmental - Provides remediation composting and recycling options, including in-vessel composting, electro-kinetic metal migration, bioremediation and genetically engineered grasses for metal removal.

SCAT Engineering, Inc. - Manufacturer of compost and bioremediation windrow turners and stackers (self-propelled and pull behind) using the elevating face technology for yard waste, food waste, biosolids, manures, and green waste.

Transform Compost Systems - Develops, designs and implements economically viable and environmentally sustainable compost systems for agriculture, government and industry.
Meta Description: [ Transform Compost Systems designs and builds economically viable and environmentally sustainable aerated in-vessel or agitated bed compost systems for industry, agriculture and communities. ]

directory of mobile sites

BAV Umwelttechnik - Offers a range of recycling and composting services for waste management.
Meta Description: [ biological, ecological and economic waste management ]

Composting related videos
to make your own garden compost. It not only saves you having to dispose of garden waste at the local tip, the compost ...
Next Video

 

HOMEADVERTISINGABOUT US

articlesartsbusinesscomputersgameshealthhospitalshomekids & teensnewsmobilephysiciansrecreationreferenceregionalscienceshoppingsocietysportsworld


Submit a Site About Become an Editor